This is not just a replacement
kit but a full upgrade package!
At your option, this kit allows your taillights to also serve as brake lights. But wait,
this kit can even be wired to add not only brake lights but also turn signals to your
taillight! The ultimate upgrade!
The install in seemless, but does require modest cutting to the rear of
the taillights. Follow our instructions and the finished product will be water tight and
transparent.
Since:
- the original factory lighting system is unaffected by the install of this product
- this product closely replicates a previous factory lighting system
- this product ENHANCES and ENLARGES the safety lighting area
- this product READILY draws attention from drivers behind the vehicle…
…there should not be any issues with various State Safety Inspections.
These units operate uniformly between 10.75 volts and 17 volts. Voltage above these
levels could result in destruction of the elements, low voltage can cause erratic flash
rates, or non-function of the units. If the units do not function as designed, it is
imperative to check your voltage levels AT THE ELEMENT (from ground to the red power wire,
and from ground to brown signal wire), prior to advising tech support of the problem. We
cannot help without first establishing that the car’s electrical system is
functioning properly.
We reserve the right to make changes to the product and/or description
to maintain the accuracy of the description and quality of the product. Please call us at
256-247-7337 or e-mail us at whut-now@redneckrides.com |
