Lookin'
for that Retro Sequential Taillight
look on your late model Thunderbird? |
|
Our kit is the easiest kit on the
market to install
|
|
The only kit on the market that makes you look like a professional! |
|
(Night Time Four-Way Flasher) |
|
Movie1
<click here>
CAUTION 5 MEG!!! |
Movie2
<click here>
CAUTION 5 MEG!!! |
|
- Four Section Sequential Turn Signals
- Adds Brake light function not
originally available from the factory !!!
- Full length functional tail lights!!!
- No Extra Power wires to install
- Easiest & Cleanest install on market - All the electronics
is contained in the taillight on the LED circuit board!!!!
- Repairs non-functioning taillights
by replacing only the defective guts!
- Limited Lifetime Warranty Against
- weather (submersible)
- dirt (don't really have to re-seal the LED panel)
- vibration (slam that trunk lid all ya want, we don't care!)
|
$330/plus
shipping and
applicable tax |
|
Includes
everything except the basic
hand tools required for installation! |
|
|
|
Includes Simple
Instructions for cleanly removing the orginal Ford LED elements |
|
Currently offered for 1992-1997
Thunderbirds... Other models soon! |
|
Manufactured from only
high-quality NEW parts by a professional electronics manufacturer.
|
|
| At this
time, we are happy to report that these taillights have been viewed on a car that legally
passed a Missouri State Safety Inspection.
Since:
- the original factory lighting system is unaffected by the install of this product
- this product closely replicates a previous factory lighting system
- this product ENHANCES and ENLARGES the safety lighting area
- this product READILY draws attention from drivers behind the vehicle…
…there should not be any issues with various State Safety Inspections.
It is important to note that flash rate will vary slightly between cars, and is
dependent upon the age and condition of the car’s flasher units and electrical
system. The Redneck Rides Sequential Circuit is extremely stable for both flash rate and
intensity to provide maximum compatibility with all installations!
It is not be advisable to modify the system by altering flash rates. It is not be
advisable to attempt to incorporate the factory pre-existing incandescent corner lighting
system into the flash sequence.
These units operate uniformly between 10.75 volts and 17 volts. Voltage above these
levels could result in destruction of the elements, low voltage can cause erratic flash
rates, or non-function of the units. If the units do not function as designed, it is
imperative to check your voltage levels AT THE ELEMENT (from ground to the red power wire,
and from ground to brown signal wire), prior to advising tech support of the problem. We
cannot help without first establishing that the car’s electrical system is
functioning properly.
We reserve the right to make changes to the product and/or description
to maintain the accuracy of the description and quality of the product. Please call us at
256-247-7337 or e-mail us at whut-now@redneckrides.com |
|
| If 'ya like what 'ya read:
Place your Order here! |
